WoCa Master Lye

Master Lye

for the lye priming of softwood

Master Lye may be used anywhere indoors for new or freshly sanded softwood (pine, spruce, pitch pine) to stop the natural yellowing process of the wood.

Available in
Master Lye is available in the container sizes of 2,5 and 5 litre containers.

Tools
Acid-proof brush, plastic bucket and stick for stirring. Wear suitable protective clothing, gloves and eye/face protection. Clean tools in water.

Please notice!
Causes burns! Keep locked up and out of the reach of children. Avoid contact with skin and eyes.

How to do...

Master Lye does not contain any white pigments.

1. The unfinished woodwork must be well sanded, clean and dry before application of lye. Clean with 125 ml Wood Cleaner mixed with 5l water.
Shake the container well and pour the lye into a plastic bucket and stir regularly during application to get a uniform finish. Stir the lye regularly during the work.

2. Apply an even coat of the lye with a nylon brush lengthwise the wood grain. Use at least 1 l of lye per 10 m2. On vertical woodwork, apply the lye from top to bottom. Tools may be cleaned in water.

Lye primed wood floors may after approx. 1 hour be cleaned with Wood Cleaner. Alternatively the lye primed surface may after approx. 8 hours be polished with a green or black pad under the polishing machine and finally vacuum cleaned. After a drying
time of 8 hours at 20° C (the wood must be completely dry) the wood floor may be oiled with Wood Floor Oil, Master Oil, Colour Oil or High Solid Master Oil or soaped with Natural Soap. The surface may also be finished with Oil Lacquer.